Greetings,
I have a timing issue with my 2007 Suzuki df250z 4-stroke and wanted to clarify with you all on a particular step in the sequence and ask a few questions. Just a little back story, I initially had warped heads due to a possible overheat issue and had milky oil. I had a local...
Well boscoe, since I'm not a certified mechanic and have no need to spend 800+ on a mechanics' manual. All I have to work with is the SELOC for my year, so not sure what the purpose of these forums are if this is the response I always get. SO, I guess I'm screwed? ..is that correct?
If you...
I had pulled my 04 Yamaha L225TURC powerhead to replace an oil pump. Upon reassembly all is connected except the end of the port injector harness, which has two plugs at the end. I am stumped as to where they connect to and can't see any options. I doubt they plug into one another, but look...
That seems to be the response of many.... "get a manual" Thanks! Isn't it the purpose of these fourms for the 'non' to seek help, or seek advice from those who may have walked this path before? I have a manual, SELOC only and does not detail what i would need. I do not have the $$$$$$...
I have a 2007 Suzuki df250Z and just completed a head job on it. The powerhead is just about complete and finishing the last few connections. I am stuck on a small black water line in the rear of the powerhead. Can anyone ID this and let me know where is connect to?
The lines are located...
Good evening,
I have my old '04 Yamaha F225 hp 4-stroke that I'm converting from a 30" shaft to a 25" for a friend that is buying it. I have to change out the mid-section shift rod and the powerhead has to be pulled. While I'm in there I am changing out the oil pump and wanted to provide a...
I appreciate it, just trying to confirm that the starboard head, top, is the #1 from what I'm narrowing it down to. The alignment dot on the crank is at the 12-o'clock, and the driven gear is matching. The starboard cyl. is just about at its' top travel with the alignment mark matching...
2007 Suzuki df250 4 stroke. I rebuilt heads from water entry from a failed gasket and upon rebuild. My manual makes reference to TDC, but does not display the cylinder firing order, or #1 cyl location. I don't want to assume, but certain that when facing the timing marks from the under side...
I have an 04' LF225TURC 225hp outboard. I am mounting my 30" outboard on a Grady White fisherman and it needs a shorter (25") unit length. I'm planning to change the mounting bolts and trim the water tube on the motor. I've searched many online parts breakdowns and have not seen any part...
