Latest activity

What's new New posts Latest activity

Bob_VT reacted to alldodge's post in the thread Happy birthday Bob_VT! with Like.

Happy BD

Sep 25, 2025
Bob_VT reacted to southkogs's post in the thread Happy birthday Bob_VT! with Like.

Happy birthday Bob!!

Sep 25, 2025
Bob_VT replied to the thread Happy birthday Bob_VT!.

Thank you everyone! I am not sure how 70 crept up on me......... I am in the "gist" part of life. All of the medical people want to...

Sep 25, 2025
Texasmark replied to the thread Prop barrel slightly smaller than the gearcase.

You mind posting a picture of that? I find that most interesting....in short, what does the engine do with its exhaust gasses as a result?

Sep 25, 2025
Texasmark replied to the thread Prop barrel slightly smaller than the gearcase.

Along those lines, I "think" I have seen high performance props where there is no "tunnel" for gasses to exit behind the prop. What I...

Sep 25, 2025
nola mike replied to the thread 2012 3.0L TKS runs great with muffs, but slow on lake....

Yes shutters=flappers. Maybe time to throw a vacuum gauge on it? Could show some subtle problems. It would also show an exhaust...

Sep 25, 2025
Texasmark reacted to jimmbo's post in the thread Prop barrel slightly smaller than the gearcase with Like.

While there are instances of using the smaller Hub on the Large Case, it is not done on Recreational Boating. The Props would need to be...

Sep 25, 2025
Texasmark reacted to jlh3rd's post in the thread Prop barrel slightly smaller than the gearcase with Like.

yes, the gases will take that path. do what you want, but 41/4" prop hubs don't work with 4 3/4" gear case diameters. That's why they...

Sep 25, 2025
Texasmark reacted to jlh3rd's post in the thread Prop barrel slightly smaller than the gearcase with Like.

what motor do you have. Different motors can have different gearcase diameters, like my Merc. CT. the problem is the exhaust gases will...

Sep 25, 2025
J

Joshto replied to the thread Prop barrel slightly smaller than the gearcase.

Thank you, this def a great suggestion. They seem available for alpha one too. And I'm only dissing the unsolicited legal counselling.

Sep 25, 2025
Bob_VT replied to the thread Enough is enough.

Mark what state are you living in? It sounds as if they want your wife to pursue a restraining order which is an excellent idea...

Sep 25, 2025
Scott06 replied to the thread 2012 3.0L TKS runs great with muffs, but slow on lake....

usually the fuel line is 3/8" double flare like brake lines would think you can get a coupler and a short section of line cut in half &...

Sep 25, 2025
harringtondav reacted to Biz603's post in the thread Volvo Penta V6-240 Fuel High Pressure Dropping to Zero with Like.

The GM part number for the pump is not on the VP pump, but it's not on the GM pump either. After realizing the VP engine was the GM 4.3...

Sep 25, 2025
Dukedog replied to the thread 1992 150hp XR6 gauge setup.

you need ta locate tha other end of that tan/blue coming from tha over temp sensor.. it should terminate on tha plastic term strip along...

Sep 25, 2025
southkogs replied to the thread Happy birthday Bob_VT!.

Happy birthday Bob!!

Sep 25, 2025

Show older items

Top