Latest activity

What's new New posts Latest activity
  • matt167
    matt167 replied to the thread New old boat checklist..
    Both deck and transom are solid and checked out or I would not have bought it. Pretty well kept boat. When I went to look at it, I was...
  • W
    Willyclay reacted to bassbugy's post in the thread Engine Identification with Like Like.
    Update: I ordered a voltage regulator for a Suzuki DF70 from Amazon for 29.99. It was a chore to replace as it was behind the electrical...
  • A
    airshot reacted to rolmops's post in the thread New old boat checklist. with Like Like.
    The two big things that you did not mention are the transom wood and the flotation foam. I bought a 1989 221 Islander, which is...
  • A
    airshot reacted to JASinIL2006's post in the thread New old boat checklist. with Like Like.
    A wise man would pull, clean and repack the trailer bearings, too.
  • rolmops
    rolmops replied to the thread New old boat checklist..
    The two big things that you did not mention are the transom wood and the flotation foam. I bought a 1989 221 Islander, which is...
  • alldodge
    alldodge replied to the thread Merc 250 Verado Fuel increase.
    Cowling note Yesterday I lifted the cowl up, lowered in place and handle snapped lock in place. Today I removed/installed it for 20...
  • alldodge
    alldodge replied to the thread Need aluminum gas tank fitting recommendations.
    Need the depth of the tank where the float is mounted and where the pickup tube will be. Want a float that is about one inch shorter...
  • alldodge
    alldodge replied to the thread Merc 250 Verado Fuel increase.
    You were right and the O-ring had a crack, replaced and took readings. Manual list 42.1-43.9 psi at idle - I read 39 psi and vibrating...
  • P
    Pmt133 reacted to matt167's post in the thread New old boat checklist. with Like Like.
    It looks like it takes a low shank walking foot, so I should be able to get one
  • matt167
    matt167 replied to the thread New old boat checklist..
    It looks like it takes a low shank walking foot, so I should be able to get one
  • B
    Bhuie replied to the thread 99 Volvo 5.0GL.
    I did. There’s a tube but no screen or anti siphon ball. I spoke with a mechanic and let him know what what was going on and he wondered...
    • IMG_6331.jpeg
  • P
    Pmt133 replied to the thread New old boat checklist..
    Just peeking, looks like it may be a janome built unit and is front loading. (Both pluses.) If you can get a walking foot for it, do it...
  • P
    Pmt133 reacted to matt167's post in the thread New old boat checklist. with Like Like.
    It’s an alpha gen 1 being 1989. And the machine is a Euro Pro 1262D. It’s designed for denim and light fabrics. I found some old online...
  • matt167
    matt167 replied to the thread New old boat checklist..
    It’s an alpha gen 1 being 1989. And the machine is a Euro Pro 1262D. It’s designed for denim and light fabrics. I found some old online...
  • JASinIL2006
    JASinIL2006 reacted to matt167's post in the thread New old boat checklist. with Like Like.
    It’s a Euro Pro yeah I could add that to the list.
Show older items
Top