Latest activity

What's new New posts Latest activity

M

MikeSchinlaub reacted to airshot's post in the thread BAR 🍸 OPEN with Like.

There are break proof glasses made of glass.....they are very thick and heavy. Our local glass maker ( Libbyy Glass) in Toledo Ohio has...

Sep 12, 2025
DanOnTheBoat replied to the thread Mercruiser Setting Timing on 3.0L.

Hey guys, so I'm starting to look at everything that I will need to do this project with. I made a list of all the things I will need...

Sep 12, 2025
W

wili replied to the thread 2000 Johnson 60 HP.

Wanted to post what was finally found. The lower power head gasket was letting water into the exhaust causing back pressure in the...

Sep 12, 2025
B

boscoe99 replied to the thread power trim removal of center cylinder.

What is the engine serial number?

Sep 12, 2025
DanOnTheBoat reacted to ESGWheel's post in the thread Mercruiser Setting Timing on 3.0L with Like.

I found this thread. I got there via Google. And no you will not snap the belt.

Sep 12, 2025
redneck joe replied to the thread Just thought I'd share a nice photo..

Beautiful.

Sep 12, 2025
redneck joe replied to the thread This trailer has rocking bunks.

No, fixed

Sep 12, 2025
P

Pmt133 replied to the thread Alpha I Gen I Hinge Pin 'bushings' ?.

So you're talking the area under the limit switch cap has slop? Or that the bell housing moves side to side?

Sep 12, 2025
A

acadian2022 replied to the thread power trim removal of center cylinder.

hi. it's a hard one to figure out have another post open but we think 1982 V6 200 HP

Sep 12, 2025
harringtondav reacted to Scott06's post in the thread Question about SX clutch torque capacity with Like.

the cones are drawn together when running so not running that wont happen and lock tight. The same things happen when they get worn and...

Sep 12, 2025
W

wellcraftpower replied to the thread Raw water impeller question..

I found it. New one on way. thanks for your help.

Sep 12, 2025
M

mtnhillsman posted the thread Alpha I Gen I Hinge Pin 'bushings' ? in Mercury MerCruiser Sterndrives & Engines.

Doing a Bellows and shift cable job on my Mercruiser Alpha I Gen I and i notice the bellhousing/gimbal hinge pins are a bit loose. By...

Sep 12, 2025
A

airshot replied to the thread power trim removal of center cylinder.

What year and model ?

Sep 12, 2025
A

airshot reacted to Scott Danforth's post in the thread 215 sundowner transom with Like.

The transom rotted after the stringers rotted Replacing the transom from the outside is 2x the work for 1/2 as good a job plus you...

Sep 12, 2025
A

airshot reacted to MikeSchinlaub's post in the thread 215 sundowner transom with Like.

Nope. The only way will be to have the motor pulled, get in there, and get messy. As for the mounts, also no. You'll have to cut the...

Sep 12, 2025

Show older items

Top